Image Dimension Measurement Insant Video Measurement System With Large FOV
Insant Video Measuring System construction:
It is composed of large viewing angle, depth of field,double telecentric lens, up(surface) and down(projection)parallel light, high-pixel CCD camera, stage, computer systems and high-precision measuring
software.
Features:
* Quick measurement, high efficiency: no need to repeat focusing, automatic location and orientation
correction, is able to scratch out about 100 image size in 2 to 5 seconds, and make measurement and
tolerance assessment,which is dozen times of the traditional 2D Video Measuring Machine;
* High accuracy: Avoid Abbe error, linear scale, working stage and otherexternal factors because of the
increasing measuring travel;
* High repeatability and stability: No need to move the linear scale and working stage, the high stability and
repeatability;
* Accuracy with less influence: Since the accuracy of the scale do not take thelinear scale but the pixel of
the CCD Camera as reference.
Specification:
| Model | iVS-30 |
| Code# | 500-030 |
| Lens | 0.3X Double Telecentric Lens |
| Working Distance | 110 mm |
| Wide Field | Ø30mm |
| Measurement Accuracy | ±2um |
| Repeatability Accuracy | ±1um |
| Camera | 2/3’’ 5 million pixel B/W camera (Ethernet) |
| Illumination | Digital controls, automatic memory |
| Telecentric Green LED Contour illumination |
| Ring White LED illumination |
| PC System | DELL (I5 Intel processors) |
| Monitors | Built-in 10.4 inch LCD Monitor(1920*1080) |
| External 21.5 inch LCD Monitor(1920*1080) |
| Measuring Software | iMeasuring 2.0 |
| Measuring Amount | Max.99 |
| Test Time | <5S (Less than 100 tests) |
| Output data | Test data, reports, determine the results (OK, NG, WAIT), etc |
| Function | 2D measurements: points, lines, circles, arcs, angles, distance, oval, O-rings, Groove, rectangle, parallelism |
| Auxiliary Function | Intersection, parallel, perpendicular, tangent, bisection. |
| Geometric Tolerances | Dimension tolerances and position tolerances, tolerances of form and position (Point position concentricity, straightness, parallelism, roundness, straightness, profile, etc) |
| Measurement Mode | Manual / Automation |
| SPC Data Management and Control | √ |
| CAD Data Input / Output | √ |
| Power Supply | AC100~240V,50~60Hz |
